Specs & Connectors
A full LCD cluster built for the 1996–2000 Civic EK. Factory plugs, no cutting.
Technical data only, taken from the panel datasheet and the current firmware. How the features work is on the Civic EK cluster page; fitment is on Fitment and chassis codes. The manual and the unit itself take precedence over anything here.
Quick Links
Section titled “Quick Links”Core Specs
Section titled “Core Specs”| Item | Spec |
|---|---|
| Panel | 12.3-inch a-Si TFT, normally black |
| Resolution | 1920 (H) × 720 (V) |
| Colors | 16.7 M |
| Pixel pitch | 0.1523 × 0.1523 mm, RGB vertical stripe |
| Viewing angle | All angles |
| Backlight | 80 LEDs, constant current |
| Display interface | 2× LVDS, 40-pin connector |
| Outline | 312.40 × 134.86 × 7.30 mm |
| Active area | 292.32 × 109.62 mm |
| Weight | 466 g (±5%) |
Operating Range
Section titled “Operating Range”The orange bar is the range the spec allows, the white line is the typical value, and the numbers at each end are the scale of that chart.
Electrical & Timing
Section titled “Electrical & Timing”| Item | Min | Typ | Max | Unit |
|---|---|---|---|---|
| Logic supply VDD | 3.0 | 3.3 | 3.6 | V |
| Backlight forward voltage VF | 21.6 | 25.6 | 28 | V |
| Backlight forward current IF | — | 240 | 300 | mA |
| Backlight power | — | 8.4 | — | W |
| Pixel clock | 90 | 100 | 130 | MHz |
| LVDS clock | 44.7 | 47.5 | 61 | MHz |
| Frame rate | 55 | 60 | 65 | Hz |
| LED life | 20000 | — | — | h |
Connector Pinout
Section titled “Connector Pinout”40-pin connector, dual LVDS: odd and even differential data pairs plus one clock pair. Power and ground take the rest. The table groups pins by function and lists only the key signals in each group.
Power and ground
LVDS clock
Odd channel data
Even channel data
Control and feedback
Power-up order is VDD → RESET → digital signals → backlight, and the reverse on shutdown. The panel runs a high-voltage driver, so the wrong order can damage it. The harness is wired in this order by the installer — nothing for the customer to do.
Compliance & Warranty
Section titled “Compliance & Warranty”| Item | Notes |
|---|---|
| Environmental | RoHS compliant |
| Weight tolerance | ±5% on LCM weight |
| Warranty | 12 months |
| Basis for these figures | The manual shipped with the unit and the current firmware; fitment is on Fitment and chassis codes |
