Boot & Shutdown Animation
Not the Same as a Firmware Update
Section titled “Not the Same as a Firmware Update”The boot animation package only changes the startup and shutdown screens; it doesn’t touch the firmware. Both flash from a USB drive, but only one package per drive:
- Animation only? The animation package alone. Firmware only? The firmware package alone.
- Both on one drive and the flash fails — nothing installs.
- Want both? Two passes: flash one, unplug, let the cluster restart, clear the drive, then flash the next.
Download
Section titled “Download”Enter the password I sent you to unlock the download, then check the SHA256 against the one shown here before using it.
Customer download
This package is for customers who bought the cluster. Enter the password I sent you to unlock the download.
Wrong password. Try again.
No password yet? Reach me from the purchase page and I will send it.
Boot animation
| Model | Version | Date | Size | Download |
|---|---|---|---|---|
| EK Civic 12.3-inch | v2026.11.18 | 2026-11-18 | 1.8 MB | Download |
EK12-BootAnimation-v2026.11.18.rarSHA256 b48283a29e44c82696a09cfec27e9d0b2301ea79b0f006c95793039ca092a82f
What’s in the Package
Section titled “What’s in the Package”Unzip it and you get a ui_res folder with three files:
| File | Purpose |
|---|---|
boot.mp4 |
Startup animation |
shutdown.mp4 |
Shutdown animation |
ui_res.ini |
Config file telling the cluster where these two videos go (replace_num=2, target path A:/media/) |
Leave ui_res.ini alone. Don’t rename the folder, and don’t move the three files around inside it.
Video Specs
Section titled “Video Specs”The two videos in the package were made to the spec below. Export your own to the same spec:
| Parameter | Spec |
|---|---|
| Resolution | 1920 × 720 |
| Frame rate | 60 fps |
| Duration | 3 seconds (180 frames) |
| Codec | H.264 |
| Container | MP4 |
| Pixel format | yuv420p |
| Audio | No audio track |
A few notes:
- Match the resolution, frame rate and duration. Oversized video may not play, or may stall halfway.
- Compose for a 1920 × 720 landscape strip — not vertical, not square, or it will be stretched.
- No audio track; the cluster doesn’t play sound.
Using Your Own Animation
Section titled “Using Your Own Animation”- Name your two videos
boot.mp4(startup) andshutdown.mp4(shutdown), overwriting the same-named files in theui_resfolder. - Filenames must match exactly, including case and extension.
boot (1).mp4,boot.MP4andboot.movare all ignored. - Only changing startup? Replace just
boot.mp4and leaveshutdown.mp4as it is — and vice versa. - Don’t touch
ui_res.ini, and don’t add any other files to theui_resfolder.
Flashing Steps
Section titled “Flashing Steps”- Unzip the downloaded archive — the archive itself can’t go on the drive.
- Use a FAT32 drive, 32 GB or smaller, and empty it first.
- Copy the whole
ui_resfolder to the root of the drive — nothing else on it. - Engine off, ignition in the ON position (don’t start the engine), then plug the drive into the cluster’s USB port.
- The cluster reads and writes on its own. Unplug when it’s done.
- Power off and on again, and check that the startup screen has changed.
If It Doesn’t Take Effect
Section titled “If It Doesn’t Take Effect”- Startup screen unchanged: check the file is named
boot.mp4, and that you copied the wholeui_resfolder to the drive root rather than just the mp4 on its own. - No reaction when plugged in: check the drive is FAT32 and 32 GB or smaller, and try another drive.
- Animation stutters or stops halfway: the video is over spec — re-export at 1920 × 720 / 60 fps / 3 seconds.
- Two failures in a row: stop, and contact support.
