Logo Pack
What This Package Does
Section titled “What This Package Does”The cluster already holds a set of vehicle logos. They’re just not unlocked at the factory.
Flashing this package opens the choice: after that, a logo option appears in the cluster menu and you pick which one to show. No images to copy, no files to edit — the artwork is already in the cluster, so it’s normal that the package contains no pictures.
Not the Same as Firmware or Boot Animation
Section titled “Not the Same as Firmware or Boot Animation”All three are flashed from a USB drive, but only one package per drive:
- Firmware: changes the cluster’s features and layouts
- Boot animation package: changes the startup and shutdown screens
- Logo package: unlocks the logo picker
Mixing them makes the flash fail and nothing installs. To change several things, do several passes: flash one, unplug, let the cluster restart, clear the drive, then flash the next.
Download
Section titled “Download”Enter the password I sent you to unlock the download, then check the SHA256 against the one shown here before using it.
Customer download
This package is for customers who bought the cluster. Enter the password I sent you to unlock the download.
Wrong password. Try again.
No password yet? Reach me from the purchase page and I will send it.
Vehicle logo
| Model | Version | Date | Size | Download |
|---|---|---|---|---|
| EK Civic 12.3-inch | v2026.11.18 | 2026-11-18 | 161 B | Download |
EK12-CarLogo-v2026.11.18.rarSHA256 2c147e67e489f5488aa5409de5c3770c8cd25772cd00b637dac8da7a8a760a80
The package is only 161 bytes and contains a single line of configuration — that’s not a broken download.
Flashing Steps
Section titled “Flashing Steps”- Unzip the downloaded archive — the archive itself can’t go on the drive.
- Use a FAT32 drive, 32 GB or smaller, and empty it first.
- Copy the whole
ui_resfolder to the root of the drive — nothing else on it. - Engine off, ignition in the ON position (don’t start the engine), then plug the drive into the cluster’s USB port.
- The cluster reads and writes on its own. Unplug when it’s done.
- Power off and on again, then pick your logo in the cluster menu.
If It Doesn’t Take Effect
Section titled “If It Doesn’t Take Effect”- No logo option in the menu: make sure the flash finished (don’t cut power before unplugging), then power cycle and look again.
- No reaction when plugged in: check the drive is FAT32 and 32 GB or smaller, and try another drive.
- Want a logo that isn’t included: adding new artwork means changing the UI — contact support.
- Two failures in a row: stop, and contact support.
