Skip to content

Civic EK 12.3-inch LCD Cluster

Installed: the cluster lit up in the factory location, all three dials running

A 12.3-inch LCD cluster that drops into the factory cluster opening of an EK Civic. The connectors plug straight in — no cutting, no splicing, and you can put the original cluster back at any time. Fits 1996–2000 Civic (EK / EJ / EM) and 1997–2001 CR-V (RD1).

The factory digits are small and hard to read at night, and realistically you only ever look at RPM and speed. This screen puts RPM, speed, fuel, coolant temperature, gear and G-force into one field of view, laid out like an instrument cluster rather than a tablet stuck on the dash.

12.3 inScreen size
1920×720Resolution
16.7M colorsColor depth
−30~85℃Operating temp
Vehicle Years Chassis code
Honda Civic 1996–2000 EK2, EK3, EK4, EK8, EK9, EJ6, EJ8, EJ9, EM1
Honda CR-V 1997–2001 RD1

Trim levels vary within the same model year. Check the chassis code before ordering — not the year.

Installed: direct replacement in the factory cluster location

All 12 features are detailed below in Feature Details; screen specs, connectors and warranty are on the Specs page.

# Feature What it does
1 12.3-inch LCD 1920×720, dual LVDS, 16.7M colors, −30~85℃
2 Six layouts, 13 badges Switch on the cluster itself — no app, no extra hardware
3 Custom vehicle logo Logos are built in; a small flash unlocks the choice in the menu
4 Vehicle data Speed, RPM, fuel and coolant temperature on one screen
5 Built-in G-sensor 3-axis MEMS, sampled on its own — not from the ECU
6 Manual / auto gear display Auto shows P / R / N / D on the right dial; manual hides the column
7 Adjustable RPM scale 8000 / 9000 / 10000 / 11000 rpm
8 Adjustable speed scale 180 / 220 / 240 km/h
9 Shift light Red bar flashes across the top when you hit the set RPM
10 Multilingual menu 12 languages
11 Plug and play Factory connectors into the factory harness, fully reversible
12 Warranty and fitment check 12-month warranty; confirm the chassis code before ordering

Installed: factory location, original connectors

Direct replacement in the factory location, no cutting. The settings menu covers five things: shift light, gear display, RPM scale, speed scale and language. Ranges and operation are in the sections below; removal and installation are on the Installation & Wiring page.

Dual LVDS interface, 16.7 million colors.

  • Bright enough in daylight — still readable with the sun directly on it
  • Separate night dimming, so it doesn’t glare in the dark
  • Operating temperature −30 to 85 ℃, storage −40 to 95 ℃

Daytime: strong sun outside, RPM and speed still legible

Daytime. With strong sunlight outside, RPM and speed are still clear.

Same at night. Backlight follows ambient light — tunnels and night driving need no manual adjustment; the RPM bar and numerals dim on their own.

Same hardware, different drawings. Three families — three-dial, white-face and horizontal bar — with different needle colors and built-in badges.

Classic three-dial with green needles
Classic green: black face, green needles, infinity badge in the center
Classic three-dial with white face
Classic white: white face, red needles, the highest contrast
Horizontal racing layout with red RPM bar
Horizontal racing: RPM bar across the top, speed in the middle, G-target on the left
Track mode with yellow bar and M gear
Track mode: yellow bar with large digital speed, M gear shown manually
SiR three-dial with red needles
SiR red: red needles on black, P/R/N/D on the right dial for autos
White-face sakura three-dial
White sakura: white face with sakura pattern and TYPE R badge

Layouts and badges switch on the cluster itself. Full details on the Specs page.

The logos are already built into the cluster — they just aren’t unlocked at the factory. Flashing a package of a few hundred bytes opens the choice; after that you pick one in the cluster menu. No image files to copy, nothing to edit.

Center dial logo close-ups: HONDATA, CIVIC TYPE R, SiR, LINK
Same screen, different logo in the center dial. Shown here: HONDATA, CIVIC TYPE R, SiR, LINK

If you want a logo that isn’t in there, it has to be built into the UI — get in touch. Flashing steps and troubleshooting: Vehicle logo.

One screen showing gear, speed, RPM, fuel, coolant and G-force

Every reading you need while driving is in one place, so you don’t have to look down and hunt for a gauge.

  • Live speed
  • Live RPM
  • Live fuel level
  • Live coolant temperature

A built-in 3-axis MEMS accelerometer, sampled independently. It doesn’t read the car’s bus or the factory ECU.

  • ±2g / ±4g ranges, 100 Hz sampling — a hundred readings a second
  • The red dot is your current G position
  • Launch for acceleration, braking for deceleration, cornering for grip
  • Works on tuned cars with a swapped or reflashed ECU

Installed: G-target in the lower left of the cluster

Installed shot: the target reads alongside speed and RPM, visible in peripheral vision.

Display only — no lap timing or data logging.

Gear display follows the transmission — no hardware change. In auto mode the right dial shows P / R / N / D vertically in the center, with the current gear boxed. Switch to manual and those letters disappear from the same dial, leaving only fuel and coolant.

The two photos below are the same right-hand dial — auto on the left, manual on the right:

Auto Manual
Auto: P/R/N/D vertically in the center of the right dial, current gear boxed Manual: same right dial, no gear letters
P / R / N / D vertically, current gear boxed Same dial, same spot — the whole column is gone, only fuel and coolant remain

Settings menu: Engine speed sets the tachometer scale

The scale isn’t fixed — change it in the Factory Settings menu.

Engine speed: the tachometer maximum, 8,000 / 9,000 / 10,000 / 11,000 rpm. For a factory redline, a cammed engine or a reflashed high-revving build, pick the setting that matches where it actually cuts fuel so the needle position and the markings line up.

Settings menu: Speed Scale sets the top speed

Speed Scale: top speed, 180 / 220 / 240 km/h. Set it lower and the speeds you actually use get more markings and are easier to read; set it higher and the top end won’t pin against the limit.

Dials after the scale change: RPM on the left, speed in the middle

Once applied, the dials are redrawn: RPM to 9,000 on the left, speed to 220 in the middle, matching the setting.

In the settings menu, set Speed alarm to the RPM you want to be warned at — 4000, for example.

At that RPM a red bar appears across the top of the horizontal layout and flashes. A glance out of the corner of your eye tells you it’s time to shift.

Settings menu Installed
Settings menu: Speed alarm 4000 boxed in red Installed: red bar flashing across the top
Speed alarm 4000 — enter the warning RPM At the set RPM, the top bar flashes red

The menu supports twelve languages, switched in settings; menu items and prompts follow. Numeric readings like speed and RPM are unaffected.

For a car sold abroad, a right-hand-drive car, or an EK imported from Japan, pick whichever language suits the driver at handover.

Factory connectors into the factory harness. The original wiring stays untouched, the car’s electrical system stays as it was, and you can revert at any time.

  • Connectors map one-to-one to the factory plug positions
  • Immobilizer, ECONO, ABS and fuel level all plug in where they were
  • No cutting, no tapping, no fuse changes

Rear connectors: one-to-one with the factory plug positions

Rear connectors, left to right: automatic transmission plug, power plug, service port (USB firmware updates), expansion port (CAN bus and external sensor signals), SRS orange plug, ECONO green plug, ABS yellow plug.

  • 12-month warranty from delivery
  • Installation by an authorized shop recommended