Firmware
Download
Section titled “Download”Click to download, then check the SHA256 against the one shown here before using it.
Firmware
| Model | Version | Date | Size | Download |
|---|---|---|---|---|
| EK Civic 12.3-inch | v2026.11.18 | 2026-11-18 | 15.7 MB | Download |
EK12-Firmware-v2026.11.18.rarSHA256 b0462fc090941bc4337d09732111a0b183a3f40a6163670d66470bdd083bc3d6
Before You Update
Section titled “Before You Update”- Engine off, ignition in the ON position (don’t start the engine)
- USB drive formatted FAT32, 32 GB or smaller
- Only the one file you’re flashing goes on the drive — firmware alone, boot animation alone, logo package alone. Delete everything else first; mixing them makes the update fail.
Update Steps
Section titled “Update Steps”- Unzip the downloaded archive — the archive itself can’t go on the drive.
- Copy the extracted folder to the USB drive. Nothing else on it.
- Power up the cluster and plug the drive into the cluster’s USB port.
- The cluster starts updating on its own.
- When green text appears, the update is done. Unplug the drive.
If the Update Fails
Section titled “If the Update Fails”- Blank screen: unplug the drive, power cycle, then plug it in again and retry.
- Nothing happens when you plug in: make sure the drive is FAT32 and 32 GB or smaller, and try another drive.
- Two failures in a row: stop. Contact support.
